Customer service: 800-260-1181
After hours: 847-220-0396 till 6 PM Central time
Monday-Thursday 9 AM to 5 PM Central time, Fridays 9 AM to 4 PM Central time.
Previous image
seven different floor box options in seven of the thirty-eight finishes available .
Next image
Zoom image

Custom Floor Box Cover Finishes, for Wood or Concrete boxes

Not rated yet

You will need to order a cover along with the custom finishes. We offer this as a courtesy to our customers only when they purchase one of our round or rectangular electrical floor boxes. These custom finishes are not intended for high-traffic areas, and usually, a floor box cover is installed under a table or near a chair, or a wall.  When you purchase our floor box and choose a special color for the cover finishing, we send the customer the box to get the installation started, and then in about 7-10 days, the finishing house will send the customer the finished floor electrical box cover to finish the job.  These custom finishes are only offered by Arnev Products, Inc., and for our floor receptacle box customers only, sorry.  We will not custom finish an old or used cover purchased from another company.

You cannot just order custom finishes, as they need a ffloor box cover to be ordered at the same time.  You will need to order which floor box cover you want to use. 

Note: Each cover is a separate charge as there as some floor boxes that use two to four covers.  Double check your floor boxes.  For large quantities we can give you a quantity discount, so ask for it.

Wood floor, Click here  Concrete Floors, Click here  See more for wood floor covers here

These custom finishes are a special courtesy for our customers only.  PLEASE NOTE: All custom-finished floor box covers are intended for metal covers, and not plastic, sorry!  The refinishing can take up to 2 weeks to ship to you.  To order sample chips CLICK HERE

Floor box sample finish color chart
Prices for each covers, starting at:
  • $89.88

  • Price Buy
    #1 Pewter $129.88  
    #2 Bronze $89.88  
    #3 Bronze with Gold Wash $89.88  
    #5 Gold $89.88  
    #7 Black $89.88  
    #8 Pewter Bright $129.88  
    #10 Verdigris $89.88  
    #12 Copper Bright $89.88  
    #13 Copper Bronze $89.88  
    #15 Satin Pearl $89.88  
    #16 Antique Copper $89.88  
    #17 Weathered White $89.88  
    #20 Satin Pewter $129.88  
    #21 Antique Gold $89.88  
    #23 Brushed Natural Pewter $129.88  
    #130 Pewter with Terra-Cotta Wash $129.88  
    #132 Pewter with Bronze Wash $129.88  
    #133 Pewter with Copper Wash $129.88  
    #134 Pewter with Verdi Wash $129.88  
    #135 Pewter with White Wash $129.88  
    #137 Pewter with Cherry Wash $129.88  
    #138 Pewter with Maple Wash $129.88  
    #231 Bronze with Black Wash $89.88  
    #233 Bronze with Copper Wash $89.88  
    #234 Bronze with Verdi Wash $89.88  
    #730 Black with Terra-Cotta Wash $89.88  
    #732 Black with Bronze Wash $89.88  
    #733 Black with Copper Wash $89.88  
    #734 black with Verdi Wash $89.88  
    #736 Black with Chocolate Wash $89.88  
    #737 Black with Cherry Wash $89.88  
    #738 Black with Maple Wash $89.88  
    #739 Black with Steel Wash $89.88  
    #931 Rust with Black Wash $89.88  
    #933 Rust with Copper Wash $89.88  
    #934 Rust with Verdi Wash $89.88  
  • SKU
    Custom 38 floor box finishes
How to install the custom finishes, and please with some care.

Warning, so please note:  When using a screwdriver to install the screws on the new custom finishes, you need to be very careful of how you use the screwdriver as you could chip off the finish on the screws and the knockout plugs. 

Please put some masking-type tape on the screwdriver flathead to install the screws and the plugs so as not to chip off the new finish.  This is very important, and please no electric screwdrivers.  So, please take your time and take gentle care when installing the covers.

Floor box covers sample finishes
Click here to see all larger images
Please read our policy for refinishing floor box covers
Thank you for your interest in refinishing your floor box cover in one of our Arnev Products, Inc. custom finishes.  For the protection of your cover, we ask that you follow these instructions.
1.  We ask that you send the COVERS ONLY Floor box covers generally come lacquer coated. To refinish the floor box covers, the lacquer must be removed, and this is done by soaking the covers in a strong chemical.  Any non-metallic parts that may be attached to the cover, including gaskets or electrical devices, receptacles, low voltage housings, etc., will be dissolved with the lacquer as well. This is why we insist that only floor box covers be sent for refinishing.  If the cover or receptacle cannot be removed from the floor box, we cannot soak off the lacquer and refinish the cover.  Any threaded area on the floor box cover, like screwed-out plugs, so these are taped off and do not have a custom finish on the threaded area, as they may not screw back in properly.  Also, no plastic-type covers are accepted. We are NOT responsible for the box itself, gaskets, or devices, so please keep all the other parts to the assembly, take off the cover, and send only the cover. 
2.  Please package any exterior screws (screws that will be visible after the box is installed) with the cover so these can be finished to match the box.  Make sure they are secure so they don't get lost or scratch the cover in transit.
3.  Custom colors are run in batches.  Consequently, the finishing time can vary depending on the schedule for the batch of the custom color you have chosen.  However, as we need only the cover, the floor box itself can be installed by your electrician to maintain your building or remodeling schedule.
4.  You have been advised by one of our customer service representatives that the custom finishes are approved for LOW TRAFFIC AREAS ONLY.  Should you decide to install the floor boxes with our finishes in HIGH TRAFFIC AREAS, any finishing 1-year limited warranty is void.  In addition, if you should decide to apply any protective finish (lacquer, polyurethane, etc.) OVER our custom finish, the finishing 1-year limited warranty is void.  Also, we cannot be responsible for these being installed in the middle of a construction site.  When these trims get installed, the contractor covers them with plastic or removes them until the project is completed, and then installs the covers and rings when the flooring is complete and dried or cured.  We are not responsible for taping them knowing they were subjected to the fresh chemicals.  The finishing rings are also not intended to be fastened to the wet concrete, but to lay on top of cured concrete and held down with adhesive caulk.  Once again, our finishing rings are also not intended for high-traffic areas, and that includes construction zones.
5.  If you approve the enclosed sample and agree to the instructions above, please sign and return the top portion of this page.  You may keep the bottom portion for your records.
If you follow these instructions, we are confident that you will love your custom floor box covers and enjoy them for years to come.
I approve of sample number______________________________ and agree to these instructions.
  • Covers are not included, and this $79.88 is the refinishing charges per cover.
    Yes-we have purchased from Arnev Products.
  • Please choose a finish and a quantity for refinishing, and allow 4-6 weeks for delivery
    #1 Pewter, #2 Bronze, #3 Bronze with Gold Wash, #5 Gold, #7 Black, #8 Pewter Bright, #10 Verdigris, #12 Copper Bright, #13 Copper Bronze, #15 Satin Pearl, #16 Antique Copper, #17 Weathered White, #20 Satin Pewter, #21 Antique Gold, #23 Brushed Natural Pewter, #130 Pewter with Terra-Cotta Wash, #132 Pewter with Bronze Wash, #133 Pewter with Copper Wash, #134 Pewter with Verdi Wash, #135 Pewter with White Wash, #137 Pewter with Cherry Wash, #138 Pewter with Maple Wash, #231 Bronze with Black Wash, #233 Bronze with Copper Wash, #234 Bronze with Verdi Wash, #730 Black with Terra-Cotta Wash, #732 Black with Bronze Wash, #733 Black with Copper Wash, #734 black with Verdi Wash, #736 Black with Chocolate Wash, #737 Black with Cherry Wash, #738 Black with Maple Wash, #739 Black with Steel Wash, #931 Rust with Black Wash, #933 Rust with Copper Wash, #934 Rust with Verdi Wash
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
  • Choose the product options first
    • $3.00

    Not rated yet
  • Choose the product options first
    • $3.97

    Not rated yet
    • 1% less
  • Choose the product options first
    • $9.95

    Not rated yet
    • 29% less
  • Choose the product options first
    • $3.00

    Not rated yet
    • Free
  • Choose the product options first
    • $10.97

    Not rated yet
    • 22% less
Customers who viewed this product bought
  • Choose the product options first
    • $239.15

    Not rated yet
  • Choose the product options first
    • $154.80

    Not rated yet
    • 12% less
  • Choose the product options first
    • $9.95

    Not rated yet
    • 29% less
  • Choose the product options first
    • $148.77

    Not rated yet
  • Drag and drop me to the cart
    • $129.87

    Not rated yet
    • 19% off