1-gang deep stamped steel Floor Box, only for Concrete

A One-gang, deep-stamped steel floor box is used for concrete. Knock-out holes are also on the floor boxes' bottom.

One gang, deep stamped steel floor box

Dimensions: 3 7/8″ H x 4 13/16″ L x 4 13/16″ W; 50.3 Cu. in.

You will need either a Tile Frame, or Carpet Flange for this electrical floor box, so please choose one (1 only), and then, choose a finish (Brass or Aluminum).

The Arnev is a stamped steel floor box with a single gang opening for concrete floors. The box is fully adjustable with a screwdriver offering 2 1/4″ of pre-pour adjustment, and 1/2″ of post-pour adjustment. The box is deep offering 50 cubic inches of interior space. Also, there are several 3/4″, 1″, and 1.25″ knockouts on the box to run your wires to. The box ships with a protective cement cap to keep the box clean and safe during concrete pouring. The box does not ship with a cover, there are several options available that are sold separately. If the box is to be used in a carpeted area a separate carpet flange can be ordered, the AP-CF-1100 series carpet flange adds 3/8″ of height to accommodate the carpet and padding. For tile or carpet applications using a flange make sure that the floor box is 3/8″ lower than the concrete pour, if you are not using a flange pour your concrete to the top of the tile frame less the thickness of the tile. The box is UL listed for the USA, and cUL listed for Canadian installations.

For Low voltage devices (CAT5-6, Tel, CTV, etc.) Click Here

Tile Frame (for tile floors)

Click on the image to order

One gang, brass, or aluminum tile frame
Dim: 4 5/16? L x 3 11/32? W

Carpet Flange (for carpeting)

Click on the image to order

Single Gang Brass or Aluminum Carpet Flange,

5 11/32? X 6 1/4?

These are the available covers needed for these boxes, so click on the cover you would like to order.

Click on the picture to take you to that product's page to order.

AP-6304-DFB-1 Floor Box Cover Hinged 2 7/8'' X 3 7/8'' Cover (1/4'' Thick) for Duplex	AP-6304-DFB-1-GFI Floor Box Cover Hinged 2 7/8'' X 3 7/8'' Cover (1/4'' Thick) for Decora receptacles	AP-6304-DFB-1- TEL. for Com/Data. Available in both Brass and Aluminum	AP-6304-DFB-LR Floor Box Cover Dual Hinged 2 7/8'' X 3 7/8'' Cover (1/4'' Thick) for Duplex	AP-6304-S Brass only Floor Box Cover Cover (1/8'' Thick) with 2'' - 1/2'' Combo Plug for Comm./data.
AP-6304-DP Floor Box Cover (1/8'' Thick) with (2) 1 1/2'' Screw Plugs for Duplex