Floor Boxes for Concrete, and Covers
-
AP-1101-SMB A One gang, deep stamped steel floor box. Dimensions: 3 7/8″ H x 4 13/16″ L x 4 13/16″ W; 50.3 Cu. in. Fully adjustable with a screwdriver offering 2 1/4″ of pre-pour adjustment and 1/2″ of post-pour adjustment. With a protective cement cap to keep the floor box clean and safe during concrete pouring. Do not ship with a cover, but there are several options available that are sold separately. If the box is to be used in a carpeted area, use a carpet flange.
-
AP-SH-1101-SMB One gang, shallow stamped steel floor box with knock-outs on the bottom. Dim: 2-13/16 H x 4-13/16 L x 4-13/16 W; 31.5 Cu. In. per gang. You will need either a Tile Frame or Carpet Flange for these floors box, so please choose one (1 only), and then choose a finish (Brass or Aluminum) for this electrical floor box.
-
AP-1102-SMB Two gangs, deep stamped steel floor box Dim: 3 7/16? H x 7 7/8? L x 4 13/16? W; 48.5 Cu. In. per gang with knock-out holes also on the floor boxes bottom. You will need either a Tile Frame or Carpet Flange for this electrical floor box, so please choose one (1 only), and then choose a finish (Brass or Aluminum).
-
AP-1103-SMB Three gangs, deep stamped steel floor box for concrete floors only. Dim: 3 3/8 H x 11 1/16 L x 4 11/16 W; 38.3 Cu. In. per gang with knock-out holes also on the bottom of these floor boxes.
-
AP-1102-SMB Two gangs, deep stamped steel floor box Dim: 2-9/16 H x 7-7/8 L x 4-13/16 W; 33.5 Cu. In. per gang with knock-out holes also on the floor boxes bottom. You will need either a Tile Frame or Carpet Flange for this electrical floor box, so please choose one (1 only), and then choose a finish (Brass or Aluminum). -
AP-SH-1103-SMB Is a Three gang, deep-stamped steel floor box The Arnev Products AP-1103-SMB floor boxes are stamped steel electrical floor boxes for concrete only. Dim: 2 15/32" H x 11-1/16 L x 4-11/16 W; 25.5 Cu. In. Per Gang.
-
Choose the product options firstAP-1101-DBE Tile Frame for our AP-1101-SMB floor box. One gang, brass tile frame The 1101-DBE-B is a single gang tile flange is made specifically for the 1100 series of floor boxes in brass color. The dimensions of the flange are 3.3″ x 4.3″. One Gang, Deep stamped steel floor box. -
Choose the product options firstAP-1102-DBE Two gangs, brass tile frame This is a two gang tile flange explicitly made for the AP-1100 series of floor boxes in brass color. AP-1102-DBE floor box. Dim: 6 3/8 L x 4 3/8 W. Two Gang, Deep stamped steel electrical floor box flange.
-
Choose the product options firstDeep, single gang cast iron floor box, fully adjustable. The AP-1101-58 is a cast iron concrete floor box with a single gang brass top. The box is fully adjustable and offers 3/8″ of adjustability after it is installed via 4 screws with just a screw.
-
Choose the product options firstOur AP-103-58 is a triple gang deep cast iron floor box for concrete floors. But can be used with a wood floor with a bit of a modification. 3/8" adjustable flange for new concrete pours. The AP-1103-58 is 3-3/4" H x 9-1/4" L x 4-5/16" W. 4 side conduit openings with 3/4" knockouts. Maximum tap 1-1/4" upon request. These floor boxes are flush mount. These floor receptacle boxes are in Brass or Aluminum also flanges and covers. Floor box covers are sold separately, one cover for each gang. The floor receptacle covers are in solid brass, aluminum, nickel silver, or on one of our 38 custom finishes.
-
Choose the product options firstAP-SH-6262-58 Shallow Flush Mount Two Gang Floor Box for Concrete Floors. Available in Brass and Aluminum also available in our exclusive 38 custom finishes. This Two Gang Cast Floor Box is Partitioned and Semi Adjustable. These are the two gang floor boxes you should choose. These electrical floor boxes have been around for many years, and they are top-of-the-line floor receptacle boxes, and you will love this product.
-
Choose the product options firstAP-SH-6263-58 Shallow Flush Mount Floor Box for Concrete Floors. Available in Brass and Aluminum also available in our exclusive 38 custom finishes. This Three Gang Cast Box is Partitioned, and is Semi Adjustable 2 1/4" X 9 1/4" X 4 1/4". When you need a flush mount electrical floor box, and in a very shallow space, these are the three gang floor boxes you should choose.
-
Choose the product options firstCF-1101-DFB Single Gang Brass Floor Receptacle Carpet Flange, 5 1/2'' X 6 1/2''. Available in both Brass and Aluminum for Floor Box Covers. These covers fit all the 1100 Series floor boxes on these pages. When the flange is resting on top of the tile frame from the 1100 series there is a 3/8" gap for the carpeting and pad.
-
Choose the product options firstAP-CF-1102-DFB Two Gang Brass Carpet Flange, 6 1/4 X 8 1/4. Available in both Brass and Aluminum Covers for floor box covers. These covers fit all the 1100 Series floor boxes on these pages and when the flange is resting on top of the tile frame from the 1100 series there is a 3/8" gap for the carpeting and pad. These are the best floor box accessories and have been around for almost 100 years.
-
Choose the product options firstCF-1103-DFB Three-Gang Brass Carpet Flange, 6 1/4 X 11 1/8. Available in both Brass and Aluminum Covers. These covers fit all the AP-1100 Series floor boxes on this page. When the flange is resting on top of the tile frame with the AP-1100 series floor box covers, there is a 3/8" gap for the carpeting and pad, so this is just what you need.
