AP-812-DFB-LR-W/2XLR Floor Box for XLR Microphone jacks

Two XLR Mic Jacks Round Floor Box

Round audio-video floor box. Flush mount for Wood and Concrete floors. This audio-video floor box comes with a standard electric duplex receptacle that you unscrew and replace with housing which has two female XLR connectors as standard. Brass, Dark Bronze, NIckel Silver and Aluminum finishes. Includes all the XLR mic housings.

Please Note:

The duplex receptacle is yours to keep, as this box comes standard with the duplex. Just replace the duplex receptacle with two screws, and pop in the XLR housing.

There will be two shipments when you order this floor box as they XLR housings are sent from another one of our company warehouses, so there is a second shipment on it's way to you..

Choose a finish for the cover, or cover or XLR device only	Price	Buy
Solid Brass (AP-812-DFB-LR-W/2-XLR) with brass cover)	$310.87	+ -
Aluminum (AP-812-DFB-LR-W/2-XLR-A) with aluminum cover	$310.87	+ -
Dark Bronze (AP-812-DFB-LR-W/2-XLR-DB) with Dark Bronze cover +35	$345.87	+ -
Nickel Silver (AP-812-DFB-LR-NS-W/2-XLR-NS) +40	$350.87	+ -

But, this will hold almost ANY TWO SMALL AV CONNECTORS or one large connecter for an additional charge and you will need to order them at this page Available Here. These electrical audio-video floor boxes are available in Solid Brass or Brushed Aluminum covers.

812-DFB SERIES

Installation Instructions

1. For wood floors

a. Using a 4” hole saw, cut the flooring to a depth equal to the thickness of the cast
flange and cover assembly being used on the floor box.

b. Center a 3.5” hole saw in the 4” opening and cut through all remaining layers of flooring.
This will create a lip for the flange of the box to rest on.

c. Remove the cover assembly and wiring device from the floor box.

d. Dropbox body into the opening and secure using #6 wood screws (not provided) through
the countersunk slots in the cast flange and into the underlying wood.

e. After wiring and installing electrical or communication devices to the floor box and ground
screw (if applicable), replace the cover plate assembly using #8/32 x ½” screws provided.

f. If an uneven cut was made into the flooring, mistake rings can be used in conjunction
with the original cover assembly or oversized covers (AP-TCP series) can be used in place of the
original cover assembly.

g. For carpeted areas, use AP-SCF-1 place it on top of the floor box (cover assembly removed first),
then insert the cover assembly into the carpet flange. Use 1.25” longer screws provided through
the cover assembly and that will affix to the floor box.

h. For tile applications, order part #812 (box body only) and an AP-TCP-style cover. Follow steps a-d
above. After wiring in step e, install the mounting plate and gasket, then place the AP-TCP style plate
on top of the floor and use #8/32 X ¾” screws provided.

2. For concrete floors

a. Not recommended for new construction as no concrete cap is provided and this is a nonadjustable box.

b. Core out 4 ¼” into concrete as deep as needed to accommodate the height of the box and the ability to
affix conduit from underneath.

c. Backfill concrete if necessary to close gaps in the floor.

d. Follow steps c-h above.

Available Now!

Round AV floor box with flip lids. Flush mount for Wood or Concrete floors. This comes with two female XLR microphone connectors already mounted, the floor box and cover, and the rubber gasket.

This will hold almost any TWO SMALL AV CONNECTORS, or one large connector, and these connectors are available in the largest selection of any AV connectors on the web at an extra charge, so click here to order other Available Connectors.

NOTE: If you are ordering only one small connector, you will need our model number #C-15112 Neutrik Blank Plug Panel Mount Connector for $4.00, to take up the open space normally used for the second connector.

Available in Solid Brass or Brushed Aluminum Covers.

Our price is $215.00, which includes the floor box, solid brass cover, AV housing (with two XLR female connectors), and rubber gasket.

Immediate delivery:

Choose a finish for the cover, or cover or XLR device only
Solid Brass (AP-812-DFB-LR-W/2-XLR) with brass cover), Aluminum (AP-812-DFB-LR-W/2-XLR-A) with aluminum cover, Dark Bronze (AP-812-DFB-LR-W/2-XLR-DB) with Dark Bronze cover +35, Nickel Silver (AP-812-DFB-LR-NS-W/2-XLR-NS) +40