AP-CF9C SERIES FLOOR BOX FOR CONCRETE FLOOR.

Audio-Video and Power floor box for concrete floors.

THE AP-CF9C SERIES FLOOR BOX is dual-service-raised for concrete floors. Audio Video Floor boxes are constructed of 16 Ga. Galvanized steel and is supplied complete with 1/4″ cast aluminum cover assembly. Receptacle floor Box supplied with two 1/2 –3/4″ combination conduit knockouts at each end (does not include 4 adjustable legs). Constructed with multiple compartments to suit the application. Standard boxes supplied with power plates and data/communication, plates punched to accept specified devices.

To order Low Voltage items: Please click on the links under these pictures:

Telephone in Black only

AP-RRP-2 Housing

Here is what is possible with these connectors above with the 4-Port Decora Housing (RRP-2-PQ)

1. The following small connectors above, can fit any combination of four devices per RRP-2-PQ quad port: 110; 140; L310-420AL; L310-460; HDMI; USB series.

However, please note: You can't put two CAT5e, or CAT6 next to each other in the same 4-port RRP-2-PQ housing, as they will not fit. But you could put one at either end of the RRP-2-PQ housing.

2. You can fit only one RRP-2-PQ in each compartment (2 for the CF9 and RF9 series, and 4 RRP-2-PQ ports for the CF10 and RF10 series) The large decora type ports will take up the entire port (HDMI & DVI feedthrough). 2 compartments=8 total possibilities, and 4 compartments=16 total possibilities.

THE CF9C SERIES BOX FOR CONCRETE FLOOR. This is a dual-service floor box for use with a conduit in a poured concrete floor. Four Ports total. Two ports for power (two duplex receptacles) and two ports for AV or low voltage, with all separated ports. Some items i.e. telephone inserts are available with one-two-three-four-and six ports on one housing that would fit all into one of the ports for real flexibility, so you could have up to four places for power plus up to 8 low voltage items all in one box (some items do take up the entire port, so you need to check the availability). It can also be used with other AV components with a decora housing like an XLR microphone (male and female, but you need to call for prices on these items), Telephone, CAT5, Cable TV, Speaker wire connectors, Banana Jacks, S-Video jacks, DVI and HDMI connectors available.

Boxes are shipped with disposable sheet metal covers to protect the box during the concrete pour. Box supplied with two 1/2-3/4" combination conduit knockouts on each end for conduit feed and complete with four adjustable legs for proper adjustment. Standard boxes supplied with power plates and data/communication plates punched to accept specified devices. The cast aluminum cover can be supplied unpainted or polyester powder coated - textured black is standard, but a wide range of other colors are available.

Note: Receptacles are not normally supplied with boxes, contact us for pricing with details of any receptacles that are required to be supplied with boxes.

Note: Decora cut-outs measure 1.3125" x 2.66"

RJ45 cut outs measure .765" X .585"

Please Choose the Power Side of the box
1 = 1 std duplex cut out, 2 = 2 std duplex cut outs, 3 = 1 "Decora" cut out, 4 = 2 "Decora" cut outs
Please Choose the Tel/Data Side of the box openings
A = 1 "Decora" cut out, B = 2 "Decora" cut outs, C = 1 "RJ45" cut out, D = 2 "RJ45" cut outs, E = 3 "RJ45" Cut Outs, F = 4 "RJ45" Cut Outs