AP-RF9C Audio-Video and Power floor box for wood floors.

THE AP-RF9C SERIES BOX is a dual-service raised floor box. The Receptacle floor is constructed of 16 Ga. Galvanized steel and is supplied complete with 1/4″ cast aluminum cover assembly. With two 1/2 –3/4″ combination conduit knockouts at each end (does not include 4 adjustable legs). AP-RF9 series access floor boxes, constructed with multiple compartments to suit the application. Standard floor receptacle boxes with power plates and Audio Video data/communication plates punched to accept specified devices.

Please Choose the Power Side of the box
Please Choose Power or the Low Voltage Side

To order Low Voltage items: Please click on the links under these pictures:

Telephone in Black only

AP-RRP-2 Housing

Here is what is possible with these connectors above with the 4-Port Decora Housing (AP-RRP-2-PQ)

1. The following small connectors above, can fit any combination of four devices per AP-RRP-2-PQ quad port: 110; 140; L310-420AL; L310-460; HDMI; USB series.

However, please note: You can't put two CAT5e, or CAT6 next to each other in the same 4-port AP-RRP-2-PQ housing, as they will not fit. But you could put one at either end of the RRP-2-PQ housing.

2. You can fit only one AP-RRP-2-PQ in each compartment (2 for the AP-CF9 and AP-RF9 series, and 4 AP-RRP-2-PQ ports for the AP-CF10 and our AP-RF10 series) The large decora type ports will take up the entire port (HDMI & DVI feedthrough). 2 compartments=8 total possibilities, and 4 compartments=16 total possibilities.

Floor Boxes are shipped with disposable sheet metal covers to protect the box during the concrete pour. Box supplied with two 1/2-3/4" combination conduit knockouts on each end for conduit feed and complete with four adjustable legs for proper adjustment. Standard boxes supplied with power plates and data/communication plates punched to accept specified devices. The cast aluminum cover can be supplied unpainted or polyester powder coated - textured black is standard, but a wide range of other colors are available.

Note: Receptacles are not normally supplied with boxes, contact us for pricing with details of any receptacles that are required to be supplied with boxes.

Note: Decora cutouts measure 1.3125" x 2.66"

RJ45 cut outs measure .765" X .585"

Please Choose the Power Side of the box
1 = 1 std duplex cut out, 2 = 2 std duplex cut outs, 3 = 1 "Decora" cut out, 4 = 2 "Decora" cut outs, 5 = 1 "Blank" cut out, 6 = 2 "Blank" cut outs, NONE
Please Choose Power or the Low Voltage Side
A = 1 "Decora" cut out, B = 2 "Decora" cut outs, C = 1 "RJ45" cut out, D = 2 "RJ45" cut outs, E = 3 "RJ45" cut outs, F = 4 "RJ45" cut outs, G = 1 "Blank" cut out, H = 2 "Blank" cut outs, NONE