Customer service: 800-260-1181
Monday-Thursday 9AM to 5PM EST, Fridays till 3PM. After hours, leave a message, or call our warehouse at 847-220-0396 till 6PM EST
AP-812 Floor Box only.
Zoom image

AP-812 Floor Box only.

Flush Mounted Round Floor Box, One 15A Duplex, No Cover The Lew Electric 812 is a cast iron floor box with no cover, there are several styles of covers sold separately. The box was meant to be installed flush in your floor creating a level surface

  • $34.38
Qty:  
  • SKU
    AP-812

812-DFB SERIES
Installation Instructions
 
1. For wood floors
 
a. Using a 4” hole saw, make a cut in the flooring to a depth equal to the thickness of the cast
flange and cover assembly being used on the floor box.
 
b. Center a 3.5” hole saw in the 4” opening and cut through all remaining layers of flooring.
This will create a lip for the flange of the box to rest on.
 
c. Remove cover assembly and wiring device from floor box.
 
d. Drop box body into the opening and secure using #6 wood screws (not provided) through
the countersunk slots in the cast flange and into the underlying wood.
 
e. After wiring and installing electrical or communication devices to the floor box and ground
screw (if applicable), replace the cover plate assembly using #8/32 x ½” screws provided.
 
f. If an uneven cut was made into the flooring, goof rings (TCP-GR1) can be used in conjunction
with the original cover assembly or oversized covers (TCP series) can be used in place of the
original cover assembly.
 
g. For carpeted areas, use SCF-1 placing on top of floor box (cover assembly removed first),
then inserting cover assembly into carpet flange. Use 1.25” longer screws provided through
the cover assembly and that will affix to the floor box.
 
h. For tile applications, order part #812 (box body only) and a TCP style cover. Follow steps a-d
above. After wiring in step e, install mounting plate and gasket, then place TCP style plate
on top of floor and use #8/32 X ¾” screws provided.
 
2. For concrete floors
 
a. Not recommended for new construction as no concrete cap is provided and this is a nonadjustable box.
 
b. Core out 4 ¼” into concrete as deep as needed to accommodate height of box and ability to
affix conduit from underneath.
 
c. Backfill concrete if necessary to close gaps in floor.
 
d. Follow steps c-h above.
 
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
  • Choose the product options first
    • $3.00

    Not rated yet
    • 25% less
  • Choose the product options first
    • $3.97

    Not rated yet
  • Choose the product options first
    • $10.88

    Not rated yet
    • 9% less
  • Choose the product options first
    • $9.88

    Not rated yet
    • 18% less
  • Choose the product options first
    • $226.74

    Not rated yet
Customers who viewed this product bought
  • Choose the product options first
    • $90.72

    Not rated yet
  • Choose the product options first
    • $79.88

    Not rated yet
  • Choose the product options first
    • $17.75

    Not rated yet
  • Choose the product options first
    • $72.93

    Not rated yet
  • Choose the product options first
    • $58.05

    Not rated yet