Flush Mounted Round Floor Box, One 15A Duplex, 2 Screw Plugs in Brass

The Arnev Products AP-812-DFB is a flush mount cast iron floor box with a round brass cover, with included power.

Choose the finish

		Price	Buy
	AP-812-DFB Brass Complete Assembly with Cover	$159.97
	AP-812-DFB-A Aluminum	$159.97
	AP-812-DFB-DB Dark Bronze	$259.97
	AP-812-DFB-NS Nickel Silver	$219.97

Flush to the Floor Power Box, which is Small in Size

The box is designed to install flush in your floor creating a level surface for a nice clean look. The box recesses in the floor so it is perfectly even and seamless with the floor. This box eliminates tripping hazards since no part of the cover sticks up above the floor. The cover is a beautiful real brass color, the cover is metal and not plastic. The cover is extremely small measuring only 4” round. The top features two 1.5” water-tight screw plugs to gain access to each plug in the outlet.

UL Listed Flush Floor Box and Outlet Included.

Inside the floor box is a single 15A duplex outlet with tamper proof plugs. You access the outlet through the 2 screw plugs in the cover. The box is UL listed for the USA and cUL listed for Canada, the receptacle is UL listed making the entire box meet code. The box has two 3/4" knockouts, and two 1/2" knockouts to connect your wiring. The box was designed for wood floors, it can also be used with carpet by purchasing the sold separately SCF-1 carpet flange. The box can also be used in post construction concrete floors by coring out a 4.25" hole, and backfilling with concrete.

The floor box assembly is ready to install and includes the box, cover, receptacle, gasket, and cover screws. The floor box was designed to provide a flush and seamless look in your floor with power, use in residential or commercial installations.

Specifications:

Cover: Brass
Outlet: 1 duplex 15A tamper proof
2 watertight screw plugs
Flush mount into floor
Box UL # 514A, cUL 22.2 #18.1-04
Outlet UL # E333616
Several knockouts for conduit
Includes: outlet, cork gasket, matching plate screws, and receptacles screws
Cover size: 4" round
Hole size: 3.5" round
Depth: 3.14" deep
Capacity: 14.5 cubic inches
Minimum floor thickness: 1"
Warranty: 1 year

812-DFB SERIES

Installation Instructions

1. For wood floors

a. Using a 4” hole saw, cut the flooring to a depth equal to the thickness of the cast
flange and cover assembly being used on the floor box.

b. Center a 3.5” hole saw in the 4” opening and cut through all remaining layers of flooring.
This will create a lip for the flange of the box to rest on.

c. Remove the cover assembly and wiring device from the floor box.

d. Dropbox body into the opening and secure using #6 wood screws (not provided) through
the countersunk slots in the cast flange and into the underlying wood.

e. After wiring and installing electrical or communication devices to the floor box and ground
screw (if applicable), replace the cover plate assembly using #8/32 x ½” screws provided.

f. If an uneven cut was made into the flooring, goof rings (TCP-GR1) can be used in conjunction
with the original cover assembly or oversized covers (TCP series) can be used in place of the
original cover assembly.

g. For carpeted areas, use SCF-1 placing on top of the floor box (cover assembly removed first),
then insert the cover assembly into the carpet flange. Use 1.25” longer screws provided through
the cover assembly and that will affix to the floor box.

h. For tile applications, order part #812 (box body only) and a TCP-style cover. Follow steps a-d
above. After wiring in step e, install the mounting plate and gasket, then place the TCP style plate
on top of the floor and use #8/32 X ¾” screws provided.

2. For concrete floors

a. Not recommended for new construction as no concrete cap is provided and this is a nonadjustable box.

b. Core out 4 ¼” into concrete as deep as needed to accommodate the height of the box and the ability to
affix conduit from underneath.

c. Backfill concrete if necessary to close gaps in the floor.

d. Follow steps c-h above.

For Low voltage devices (CAT5-6, Tel, CTV, etc.) Click Here

This floor box is furnished with a Solid Brass cover & a 15A Receptacle, and a Very heavy-duty cast iron box. (Size: 14.5 cubs. in. interior). Flush mount. Dimensions are 4" top and 3-18" bottom section with 6 conduit openings. Two 3/4" and two 1/2" openings on the sides, and two 1/2" openings on the bottom. Additional covers that work with these boxes are the AP-TCP Series at 5-3/4 inch round in brass and aluminum or our AP-PFC series heavy plastic covers. Also, the AP-812-MKM double-hole saw is a convenient method for cutting the wood floor, as it's almost mistake-proof!

Available 4" covers for this box above. Solid Brass, Aluminum, and some Nickel Silver

AP-523-DP Floor Box Cover 4'' Cover (1/8'' Thick) with (2) 1-1/2'' Screw Plugs for Duplex. Flush Mount.	AP-523-DP-NS Nickel Silver Cover Floor Box Cover for Concrete Floors 4'' Cover (1/8'' Thick) with (2) 1-1/2'' Screw Plugs for Duplex	AP-524 Floor Box Cover for Single Receptacles and Concrete Floors 4'' Cover (1/8'' Thick)
AP-DFB-LR Floor Box Cover for Concrete Floors in Brass and Aluminum Dual Hinged 4'' Cover (1/4'' Thick) for Duplex	AP-DFB-1 Floor Box Cover in Brass and Aluminum for Concrete Floors Hinged 4'' Cover (1/4'' Thick) for Duplex	AP-DFB-1-GFI Floor Box Cover Brass and Aluminum for Concrete Floors but for Decora Receptacle	AP-DFB-1-TEL Floor Box Cover Floor Box for Telephone, for Concrete Floors in Brass and Aluminum

To order custom finishes CLICK HERE!

Please read our policy for refinishing floor box covers

Thank you for your interest in refinishing your floor box cover in one of our Arnev Products, Inc. custom finishes. For the protection of your cover, we ask that you follow these instructions.

1. We ask that you send the COVERS ONLY. Floor box covers generally come lacquer coated. To refinish the floor box covers, the lacquer must be removed, and this is done by soaking the covers in a strong chemical. Any non-metallic parts that may be attached to the cover, including gaskets or electrical devices, receptacles, low voltage housings, etc., will be dissolved with the lacquer as well. This is why we insist that only floor box covers be sent for refinishing. If the cover or receptacle cannot be removed from the floor box, we cannot soak off the lacquer and refinish the cover. Also, no plastic-type covers are accepted. We are NOT responsible for the box itself, gaskets, or devices, so please keep all the other parts to the assembly, take off the cover, and send only the cover.

2. Please package any exterior screws (screws that will be visible after the box is installed) with the cover so these can be finished to match the box. Make sure they are secure so they don't get lost or scratch the cover in transit.

3. Custom colors are run in batches. Consequently, the finishing time can vary depending on the schedule for the batch of the custom color you have chosen. However, as we need only the cover, the floor box itself can be installed by your electrician to maintain your building or remodeling schedule.

4. You have been advised by one of our customer service representatives that the custom finishes are approved for LOW TRAFFIC AREAS ONLY. Should you decide to install the floor boxes with our finished in HIGH TRAFFIC AREAS, any finishing 1-year limited warranty is void. In addition, if you should decide to apply any protective finish (lacquer, polyurethane, etc.) OVER our custom finish, the finishing 1-year limited warranty is void.

5. If you approve the enclosed sample and agree to the instructions above, please sign and return the top portion of this page. You may keep the bottom portion for your records.

If you follow these instructions, we are confident that you will love your custom floor box covers and enjoy them for years to come.

I approve of sample number______________________________ and agree to these instructions.

X________________________________________________________________________________________________

Choose the finish
AP-812-DFB Brass Complete Assembly with Cover, AP-812-DFB-A Aluminum, AP-812-DFB-DB Dark Bronze, AP-812-DFB-NS Nickel Silver

There are no comments yet. Be the first to leave a comment

Customers who bought this product also bought

Drop items here to shop

Product has been added to your cart

Checkout

Choose the product options first

Clear Glass Switch Plates - Paintable Low Iron
- $10.75
Not rated yet
- 40% less
Choose the product options first

Real Glass Mirrored Switch plates
- $10.97
Not rated yet
- 22% less
Choose the product options first

Stainless Steel Light Switch Plates with matching screws
- $10.87
Not rated yet
Choose the product options first

White Enamel Light Switch Plate Covers
- $6.87
Not rated yet
Choose the product options first

Paintable Pre-Primed Metal Light Switch Plate Covers
- $6.87
Not rated yet

Customers who viewed this product bought

Choose the product options first

Custom Finished Floor Box Covers
- $89.88
Not rated yet
Choose the product options first

"Goof Rings" cover bad floor cuts for Round Floor Boxes
- $59.95
Not rated yet
Choose the product options first

Cover with Two Screw Plugs for Duplex Floor Boxes
- $119.97
Not rated yet
- 17% less
Choose the product options first

Dual Screw Plug Floor Box Covers / Duplex in Brass and Alum.
- $206.00
Not rated yet
- 18% less
Choose the product options first

Floor Box Cover, Brass, Alum, Bronze, Wood or Concrete floor
- $188.67
Not rated yet