custom acrylic mirrored switch plate covers

Acrylic Mirrored Switch Plates, for CAT6, TEL, and more

Acrylic Mirrored Light Switchplates in 34 configurations and these acrylic wall plates could be a very good alternative for mirrored glass switch plates. These acrylic wall plate covers are about 1/8 in thickness and are very easy to mount on a glass mirror on your wall. The acrylic switch plate covers come in many electrical configurations.

Step 1: NEW FEATURE! Choose all the quantities of the configurations in one step, then click the Add to Cart button, it's as easy as 1-2-3

		Price	Buy
	A. Single Switch (SS)	$10.61
	B. Outlet Cover (OC) 2 oval shaped holes	$10.61
	C. Double Switch (DS)	$16.61
	D. Combo Switch (CS)	$16.61
	E. Triple Switch (TS)	$20.61
	F. Ground fault/Rocker (GF). Also for GFI	$10.61
	G. Double Switch/Outlet Cover (DSOC)	$20.61
	H. Ground fault/Single Switch (GFSS)	$16.61
	I. Double Outlet Cover (QOC) 4 oval shaped holes	$16.61
	J. Triple Ground fault/Rocker (TGF). Also for GFI	$20.61
	K. Double Ground fault/Rocker (DGF). Also for GFI	$16.61
	L. Quad Switch (QS)	$30.61
	M. Groundfault/Double Toggle (GFDT)	$16.61
	N. Quad Ground fault/Rocker (QGF). Also for GFI	$30.61
	O. Outlet Cover/Triple Switch (OCTS)	$30.61
	P. Ground fault/Triple Switch (GFTS)	$30.61
	Q. Ground fault/Double Switch (GFDS)	$22.61
	R. Double Ground fault/Single Switch (DFG/SS)	$22.61
	S. Double Outlet/Single Switch (DOC/SS)	$22.61
	X. Triple outlet cover (TOC)	$22.61
	Five GF rocker type	$64.61
	Six GF/Rocker Switches	$74.61
	Five Toggle Switch	$54.61
	Six Toggle Switch	$64.61
	Y. Single Blank	$10.61
	Z. Double Blank	$16.61
	AA. Single Cable TV, Satellite with f connector attached	$24.61
	BB. Single Telephone with jack attached	$29.61
	BB-2. One Cable TV, Satellite with f connectors attached and One Telephone connector attached.	$33.61
	GG. Round Dimmer Knob	$28.61
	Single Modular snap-in, see little image above: Snap in's not included	$32.61
	Double Modular snap in, see little image above: Snap in's not included	$34.61
	Triple Modular snap in, see little image above: Snap in's not included.	$36.61
	Quad Modular snap in, see little image above: Snap in's not included.	$38.61
	Six Modular snap in, see little image above: Snap in's not included.	$40.61
	Single size gasket (may be needed) 3 1/2" wide by 5 1/4" high	$8.61
	Double size gasket (May be needed) 5 1/4" wide by 5 1/4" high	$9.61
	Triple size gaskets	$10.61
	Quad size gaskets	$11.61

HAVE YOU DOUBLE CHECKED YOUR ORDER?

You might need a gasket with your glass switch plates. If the plug or switch in the wall is sticking out too far, the glass switch plate may not fit snugly against the wall. Since all glass switchplates are flat on the backsides, our gaskets peel and stick to the outer edges of the backsides, and let the plug or switch extend into the plate, and let the glass plate fit snugly against the wall for the best-desired appearance.

The gaskets at about 1/8th inch clear acrylic, and almost disappear when installed correctly and allow the glass switch plate to fit tight against the wall. In some cases, you may need two gaskets. They are available in 4 sizes for the 1-2-3-4 gang switch plates. Please review the installation instructions by scrolling down this page for more information.

These are our Custom Modular Acrylic Mirrored Switch Plates for Tel, Cat5, CTV, and more in One, Two, Three, Four, and Six Ports to insert a pop-in low-voltage device.

All our acrylic mirrored switchplates are referred to as mid-sized parts. They are a bit larger than the standard size, but not oversized. Having them a bit larger usually covers up any irregularities that could have occurred when the drywall was cut for the electrical box openings, which does occur quite often. Also, this would cover up any outlines with old paint or wallpaper. However, they are not so oversized that they don’t fit into the spaces usually allotted for the standard sizes.

Our acrylic mirrored wall plates can be flipped upside-down to fit your particular electrical configuration. Let’s say you have a combination style, with the switches on one side, and the outlets on the other side. You can just flip the part over.

Step 1: NEW FEATURE! Choose all the quantities of the configurations in one step, then click the Add to Cart button, it's as easy as 1-2-3
A. Single Switch (SS), B. Outlet Cover (OC) 2 oval shaped holes, C. Double Switch (DS), D. Combo Switch (CS), E. Triple Switch (TS), F. Ground fault/Rocker (GF). Also for GFI, G. Double Switch/Outlet Cover (DSOC), H. Ground fault/Single Switch (GFSS), I. Double Outlet Cover (QOC) 4 oval shaped holes, J. Triple Ground fault/Rocker (TGF). Also for GFI, K. Double Ground fault/Rocker (DGF). Also for GFI, L. Quad Switch (QS), M. Groundfault/Double Toggle (GFDT), N. Quad Ground fault/Rocker (QGF). Also for GFI, O. Outlet Cover/Triple Switch (OCTS), P. Ground fault/Triple Switch (GFTS), Q. Ground fault/Double Switch (GFDS), R. Double Ground fault/Single Switch (DFG/SS), S. Double Outlet/Single Switch (DOC/SS), X. Triple outlet cover (TOC), Five GF rocker type, Six GF/Rocker Switches, Five Toggle Switch, Six Toggle Switch, Y. Single Blank, Z. Double Blank, AA. Single Cable TV, Satellite with f connector attached, BB. Single Telephone with jack attached, BB-2. One Cable TV, Satellite with f connectors attached and One Telephone connector attached., GG. Round Dimmer Knob, Single Modular snap-in, see little image above: Snap in's not included, Double Modular snap in, see little image above: Snap in's not included, Triple Modular snap in, see little image above: Snap in's not included., Quad Modular snap in, see little image above: Snap in's not included., Six Modular snap in, see little image above: Snap in's not included., Single size gasket (may be needed) 3 1/2" wide by 5 1/4" high, Double size gasket (May be needed) 5 1/4" wide by 5 1/4" high, Triple size gaskets, Quad size gaskets
HAVE YOU DOUBLE CHECKED YOUR ORDER?
PLEASE SELECT YES OR NO!, YES, NO