These switchplates are available in the following configurations:
NOTE: B,F,I,J,K,M,N,R,S,T,U,V,W,X,Y,Z,AA,BB are in our Punched Border Design, (Not stars), but are intended to go with the star design. Some configurations such as D,G,H,O,P,Q, have small star around the switch opening.
If an outlet or groundfault opening and a switch is on the same switchplate, this is how we design our product. We use a small star design around the switch, and the border design around the outlet or groundfault opening. This is because there is no room for the large punched star on the switch plate.
All light switchplates can be installed with the outlet on either the right, or the left side, by simply turning the part and flipping it over.
Available in the following configurations:
Click Here to order other Telephone, CAT5, CableTV/Satellite,
Blank Inserts for Type F (groundfault, or decora type) switchplates.
Also for Banana Jacks, Speaker wire inserts, Dimmer knob inserts,
RCA, DVI, HDMI, and other accessories in 6 colors.
by clicking on the "Detailed Images" above
| All our switchplates are referred to as a mid-sized part. They are a bit larger than the standard size, but not over-sized. Having them a bit larger usually covers up any irregularities that could have occurred when the dry wall was cut for the electrical box openings, which does occur quite often. Also, this would cover up any outlines, or paint or wallpaper color differences left by the old light switch cover. However, they are not so oversized that they don't fit into the space usually allotted for the standard sizes.
Our switchplates can be flipped up-side-down to fit your particular electrical configuration. Let's say you have combination style, with the switches on one side, and the outlets on the other side. You can just flip the part over, and this works great in all cases.