Here is what is possible with these connectors above with the 4-Port Decora Housing (AP-RRP-2-PQ)
1. The following small connectors above, can fit any combination of four devices per AP-RRP-2-PQ quad port: 110; 140; L310-420AL; L310-460; HDMI; USB series.
However, please note: You can't put two CAT5e, or CAT6 next to each other in the same 4-port AP-RRP-2-PQ housing, as they will not fit. But you could put one at either end of the RRP-2-PQ housing.
2. You can fit only one AP-RRP-2-PQ in each compartment (2 for the AP-CF9 and AP-RF9 series, and 4 AP-RRP-2-PQ ports for the AP-CF10 and our AP-RF10 series) The large decora type ports will take up the entire port (HDMI & DVI feedthrough). 2 compartments=8 total possiblities, and 4 compartments=16 total possibilities.
Floor Boxes are shipped with disposable sheet metal cover to protect box during concrete pour. Box supplied with two 1/2-3/4" combination conduit knockouts each end for conduit feed and complete with four adjustable legs for prepour adjustment. Standard boxes supplied with power plates and data/communication plates punched to accept supecified devices. The cast aluminum cover can be supplied unpainted or polyester powder coated - textured black is standard, but a wide range of other colours are available.
Note: Receptacles are not normally supplied with boxes, contact us for pricing with details of any receptacles that are required to be supplied with boxes.
Note: Decora cut outs measure 1.3125" x 2.66"
RJ45 cut outs measure .765" X .585"