To order Low Voltage items: Please Pictures below:
To order Low Voltage items: Please click on the links under these pictures:
Here is what is possible with these connectors above with the 4-Port Decora Housing (RRP-2-PQ)
1. The following small connectors above, can fit any combination of four devices per RRP-2-PQ quad port: 110; 140; L310-420AL; L310-460; HDMI; USB series.
However, please note: You can't put two CAT5e, or CAT6 next to each other in the same 4-port RRP-2-PQ housing, as they will not fit. But you could put one at either end of the RRP-2-PQ housing.
2. You can fit only one RRP-2-PQ in each compartment (2 for the CF9 and RF9 series, and 4 RRP-2-PQ ports for the CF10 and RF10 series) The large decora type ports will take up the entire port (HDMI & DVI feedthrough). 2 compartments=8 total possibilities, and 4 compartments=16 total possibilities.
THE RF10C SERIES BOX FOR WOODEN FLOOR. This is a dual service floor box for use with a conduit on a wooden floor. Eight Ports total. Four ports for power (four duplex receptacles) and four ports for AV or low voltage, with all separated ports. Some items i.e. telephone inserts are available with one-two-three-four-ports on one housing (RRP-2-PQ), that would fit all into one of the ports for real flexibility, so you could have up to four places for power plus up to 16 low voltage items all in one box (some items do take up the entire port, so you need to check the availability). It can also be used with other AV components with a decora housing like an XLR microphone (male and female, but you need to call for prices on these items), Telephone, CAT5, Cable TV, Speaker wire connectors, Banana Jacks, S-Video jacks, DVI and HDMI connectors available.
Boxes are shipped with disposable sheet metal cover to protect the box during the concrete pour. Box supplied with two 1/2-3/4" combination conduit knockouts on each end for conduit feed and complete with four adjustable legs for proper adjustment. Standard boxes supplied with power plates and data/communication plates punched to accept specified devices. The cast aluminum cover can be supplied unpainted or polyester powder coated - textured black is standard, but a wide range of other colors are available.
Note: Receptacles are not normally supplied with boxes, contact us for pricing with details of any receptacles that are required to be supplied with boxes.
Note: Decora cut outs measure 1.3125" x 2.66"
RJ45 cut outs measure .765" X .585"