Previous image Next image
Zoom image

AP-812-DFB-524 Available in Brass Only

These Floor Boxes and Covers are designed for Data Port with Solid Brass Cover. Tel, CAT5, F connector, etc. This floor box is for wood or concrete.  Brass of Aluminum covers available.

  • $74.00

Please fill in the dropdown to continue!

Qty:  
  • SKU
    AP-812-DFB-524

 

This floor box is a very heavy duty cast iron box.  Flush mount.  Especially designed for Data like CAT5, Telephone, Cable TV, etc. with Solid Brass cover center mount.  Low voltage housing included.  Dimensions are 4" top and 3-1/8" bottoms with 6 conduit openings.  Two 3/4" and two 1/2" openings on the sides.  Two 1/2" openings on the bottom.  Additional covers that work with these boxes are the AP-TCP Series at 5-3/4 inch round in brass and aluminum, or our AP-PFC series heavy plastic covers.  This floor box is designed for either a wood or concrete floor.

(Size:  4" x 3-1/8"  14.5 cu. in. interior)

Available 4" floor box covers for this box above.  Solid Brass, Aluminum, and some Nickel Silver
AP-523-DP Floor Box Cover
 4'' Cover (1/8'' Thick) with
(2) 1-1/2'' Screw Plugs for
Duplex. Flush Mount.
 
 
 
 
 
 
AP-523-DP-NS Nickel Silver Floor Box Cover
Floor Box Cover for Concrete
Floors 4'' Cover (1/8'' Thick)
with (2) 1-1/2'' Screw Plugs
for Duplex
 
 
 
 
 
AP-524 Floor Box Cover
for Single Receptacles and
Concrete Floors 4'' Cover
(1/8'' Thick) available in
brass or aluminum
covers
 
 
 
 
 
AP-DFB-1 Floor Box Cover
in Brass and Aluminum for
Concrete Floors Hinged 4''
Cover (1/4'' Thick) for Duplex
 
 
 
AP-DFB-1-GFI Floor Box Cover
Box Cover Brass and
Aluminum for Concrete
Floors but for Decora
Receptacle
 
 
AP-DFB-1-TEL Floor Box Cover
Box Cover Floor Box for
Telephone, for Concrete
Floors in Brass and Aluminum
 
 
AP-DFB-LR Floor Box Cover
Cover for Concrete Floors
in Brass and Aluminum Dual
Hinged 4'' Cover
(1/4'' Thick) for Duplex
 
To order custom finishes CLICK HERE!
 
  Click to view available Finishes
 
 
Please read our policy for refinishing floor box covers
 
Thank you for your interest in refinishing your floor box cover in one of our Arnev Products, Inc. custom finishes.  For the protection of your cover, we ask that you follow these instructions.
 
1.  We ask that you send the COVERS ONLY.  Floor box covers generally come lacquer coated. To refinish the floor box covers, the lacquer must be removed, and this is done by soaking the covers in a strong chemical.  Any non-metallic parts that may be attached to the cover, including gaskets or electrical devices, receptacles, low voltage housings, etc., will be dissolved with the lacquer as well. This is why we insist that only floor box covers be sent for refinishing.  If the cover or receptacle cannot be removed from the floor box, we are unable to soak off the lacquer, and cannot refinish the cover.  Also, no plastic type covers are accepted. We are NOT responsible for the box itself, gaskets or devices, so please keep all the other parts to the assembly, take off the cover, and send only the cover. 
 
2.  Please package any exterior screws (screws that will be visible after the box is installed) with the cover so these can be finished to match the box.  Make sure they are secure so they don't get lost or scratch the cover in transit.
 
3.  Custom colors are run in batches.  Consequently, the finishing time can vary depending upon the schedule for the batch of the custom color you have chosen.  However, as we need only the cover, the floor box itself can be installed by your electrician to maintain your building or remodeling schedule.
 
4.  You have been advised by one of our customer service representatives that the custom finishes are approved for LOW TRAFFIC AREAS ONLY.  Should you decided to install the floor boxes with our finished in HIGH TRAFFIC AREAS, any finishing 1 year limited warranty is void.  In addition, if you should decide to apply any protective finish (lacquer, polyurethane, etc.) OVER our custom finish, the finishing 1 year limited warranty is void.
 
5.  If you approve the enclosed sample and agree to the instructions above, please sign and return the top portion of this page.  You may keep the bottom portion for your records.
 
If you follow these instructions, we are confident that you will love your custom floor box covers, and will enjoy them for years to come.
 
I approve of sample number______________________________ and agree to these instructions.
 
X________________________________________________________________________________________________
  • Available in Brass or Aluminum covers.
    Please Choose a cover finish, Brass (only available in brass)
Customer reviews
Average rating:

Score: 0. Votes: 0
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
  • Choose the product options first
    • $3.97

    Not rated yet
  • Choose the product options first
    • $73.82

    Not rated yet
    No reviews.
    • 3% less
  • Choose the product options first
    • $9.88

    Not rated yet
    • 18% less
  • Drag and drop me to the cart
    • $62.10

    Not rated yet
  • Drag and drop me to the cart
    • $117.40

    Not rated yet
Customers who viewed this product bought
  • Choose the product options first
    • $73.82

    Not rated yet
    No reviews.
    • 3% less
  • Choose the product options first
    • $79.88

    Not rated yet
  • Drag and drop me to the cart
    • $12.88

    Not rated yet
  • Choose the product options first
    • $58.05

    Not rated yet
  • Choose the product options first
    • $72.93

    Not rated yet
    No reviews.