Tombstone and Nozzle type floor boxes and covers

Aluminum Floor Box Nozzle or Tombstone model number AP-FDN-709-A electrical floor box for up to (4) Duplex Receptacles (Not Included) 4 3/4''H 4 1/4''L 4 1/4''D.  This box needs two covers, and usually, it is one for the receptacles used, and then the blank cover (AP-712-A) is used to hide all the wires. CERTIFIED TO CSA STANDARD C22.2 #18.1
CONFORMS TO UL STANDARD 514

This box is used by many food stores, like Publix Food Stores in the Southeast and East Coast of the USA.

The Arnev Products AP-712-A is an aluminum nozzle blank floor box cover plate for the AP-FDN-709-A floor nozzle. This floor boxes plate covers up the opening in the floor nozzle if you don’t need anything else in that spot, the dimensions of the plate are 4.75″ x 4.18″ x .30. 

AP-711-A  Aluminum Tombstone / Nozzle plate will accommodate a 30-50 amp receptacle for the A-FDN-709-A floor box.  The Arnev AP-711-A is an aluminum nozzle electrical floor box plate for the A-FDN-709-A floor box nozzle. The plate will hold one 30 to 50-amp receptacle, the dimensions of the plate are 4.73″ x 4.16″ x .88″.  Each floor nozzle requires 2 plates.

Aluminum Nozzle Plate cover or tombstone cover plate, will Accommodate (2) Duplex Receptacles. 

Aluminum Nozzle Floor Box Plate will Accommodate (2) GFI Receptacles. This electrical floor box plate has 2 decora openings, and the dimensions of the plate are 4.73″ x 4.16″ x .88″.  Each floor nozzle.

AP-FDN-300-A-W/P Aluminum Floor Nozzle with Partition for Power and low voltage in the same floor box.  3''H 4 3/4''L 4 1/4''D (2) 3/4'' (Threaded).  CERTIFIED TO CSA STANDARD C22.2 #18.1
CONFORMS TO UL STANDARD 514

Aluminum Floor Box Nozzle Type Plate for Duplex Receptacle. Aluminum for Tombstone floor boxes AP-FDN-300-A and AP-FDN-300-A-W/P.  

Aluminum Nozzle plate for GFI receptacle. This floor box plate cover is an aluminum nozzle plate for our AP-FDN-300-A and AP-FDN-300-A-W/P floor nozzles. The floor boxes plate has 1 decora opening, the dimensions of the plate are 4″ x 2″ x .06″. Each electrical floor box nozzle requires 2 plates.

Aluminum Nozzle Floor Box AP-806-A Plate for Single Receptacle Or Cable.  Aluminum for Tombstone floor boxes AP-FDN-300-A and AP-FDN-300-A-W/P. The plate has 1 hole in it that can be used as a single receptacle, or as a cable pass-through. 

AP-803-A Aluminum Blank cover for Tombstone floor boxes AP-FDN-300-A and AP-FDN-300-A-W/P. The plate can be used to cover the opening in the floor nozzle if nothing else is needed. The dimensions of the plate are 4″ x 2″ x .30.